KORDAS DANA 10mm caving semi-static rope

Semi-static caving rope for large groups. Very handy and easy to handle when rigging, keeping their performance over time. Is constructed so that it resists better rapid or long descents without burning. NO NEED TO WET IT BEFORE USING. Bobin directly to the vertical.

• Standard: EN 1891 Type A is the highest category of stretch ropes and offers the user the broader safety margins. Rope type used by professional rescue groups, caving groups, equipment in the mountains or to work in big wall. You can go up and down just in single rope.
  

• CE0120 Approval

• Diameter: 9.9 mm

• Weight per meter: 63.1 g / m

• Weight per meter of the core: 36.6 g / m

• Percentage by weight of the core: 58%

• Weight per meter of cover: 26.5 g / m

• Percentage by weight of cover: 42%

• Knot flexibility: 1

• Cover slipping: 0 mm

• Elongation with 50/150 Kg: 3.6%

• Impact force for F = 0.3 to 80 kg: 534 daN

• Number of falls F=1 and 80 kg: OK (the standard requires at least 5)

• Material: Polyamide

• Melting point: 254 ° C

• Shrinkage in water: -0.1% (instead of shrinking, stretching)

• Figure of 8 Knot strength: OK (the standard requires at least 3 minutes with 1500 daN)

• Static strength: 2730 daN

• Finishing STABILITY: total binding of the sheath and core. Elimination of the effect of stocking or slip the cover over the rope. Rope gives a better dimensional stability over its lifetime. Significantly reduces the progressive shrinkage of the cord over time. This finish makes it not necessary to wet them before use and that the first time you wet it will not shrink (you won't lose between 4 and 8% of rope)

• Finish Durability: high resistance to abrasion with a nicer touch
  

• Finish TOTAL DRY: thermochemical with fluorocarbon finish. The rope is waterproof. Absorbs less water, lasts longer and does not freeze